Eskimo 69168 - Manuel (Page 9)

Quickflip ™ 2 (69167), Quickflip ™ 3 (69168) & Express ™ 2 (69802)
Page 9
GetEskimo.com
1-800-345-6007
4. Attach (3) seat bases to top of base tubes using (12) provided 1/4-20 x
2-3/4” bolts, nyloc nuts and (24) washers. SEE fIGuRE 5B.
5. Attach backrest frame to each seat base using (6) provided 1/4-20 x 1-1/2”
bolts and nyloc nuts. SEE fIGuRE 5B. you may now tighten all nut &
bolt assemblies. Be sure not to over tighten or crush tubing when
tightening!
6. Attach (3) removable seat cushions (68162) to the top of seat bases and
snap the side release buckles together. Pull straps tight so seat is not
loose.
7. Attach (3) removable backrest cushions (68163) to the backrest frames
and secure with Velcro.
WARNING
BE SuRE SEAT PAD & BuCKlES ARE SECuREly AND COR-
RECTly ATTACHED TO PREVENT ACCIDENTAl REmOVAl!
fIGuRE 5B
front base tube
rear base tube
backrest frame
seat base
all nuts are 1/4”
all washers are 1/4”
(12) 1/4” x 2-3/4” bolts
(6) 1/4” x 1-1/2” bolts
lEfT SIDE
RIGHT SIDE