Eskimo 69168 - Manuel (Page 8)

Quickflip ™ 2 (69167), Quickflip ™ 3 (69168) & Express ™ 2 (69802)
Page 8
GetEskimo.com
1-800-345-6007
fOR QuICKflIP 3 ONly
1. Attach (2) seat kit mount brackets (68430) to each hinge assembly using
(4) provided 1/4-20 x 3/4” hex head bolts and nyloc nuts. Make sure the
mount brackets are positioned in the correct hole locations so seat brace
and seat positions are correct later in instructions.
SEE fIGuRE 4.
2. Attach (2) base tubes (68441) to the top side of seat kit mount brackets
using (4) provided 1/4-20 x 1-3/4” bolts, nyloc nuts and (8) washers. SEE
fIGuRE 5A.
3. Attach seat brace (68440) to bottom of rear brace tube using (2) provided
1/4-20 x 2-1/4” bolts, nyloc nuts and (4) washers. SEE fIGuRE 5A.
fIGuRE 4 (right side shown)
fIGuRE 5A
base tubes
(2) 1/4” nuts
(2) 1/4” x 3/4” bolts
hinge seat kit mount bracket
all nuts are 1/4”
all washers are 1/4”
seat kit mount bracket
seat brace
(4) 1/4” x 1-3/4” bolts
(2) 1/4” x 2-1/4” bolts