Avanti 249SYW/YB - Manuel (Page 3)

INSTALLATION
- Place your appliance on a floor strong enough to support it when fully
loaded.
* This appliance is designed for free standing only and should not be re­
cessed or built - in.
• Let air circulate freely around appliance. Keep rear 4 inches away from
wall and at least 3 inches space on sides,
• The location you choose should be away from beat sources like stove,
heater or radiator.
* Avoid installing your appliance in humid places (like next to sinks).
SETTING THE TEMPERATURE CONTROL
The temperature control dial has settings from the warmest('*Min”) to the
coldest( Max )counterclockwise, plus' OFF”.
Initially set the dial to the'*NORMAL”position. After using the refrigerator
for a full day, adjust the dial to the setting that is best suited to your needs.
Turning the control to the “OFF stops the cooling cycle. You must allow at
least 3 minutes before starting it again,
CLEANING AND MAINTENANCE
Unplug the refrigerator and remove food, shelves and tray. Wash inside
with a solution of warm water and baking soda. Then rinse and diy. Do not
use soaps, detergents or spray cleaners as they may cause odors inside
compartment.
Wash ice cube tray, shelves and drip tray in mild detergent solution and dry
with a soft cloth.
To help prevent odors, leave an open box of baking soda inside the refrig­
erator, on the shelf.
Wipe outside of refrigerator with a soft cloth dampened with soapy water.
Use only mild, soapy \yater to clean the door gasket.
VACATION AND MOVING CARE
VACATION
Remove all the food if you are going for a month or more. Unplug the re­
frigerator and clean it. Rinse well and dry. Keep doors open far enough for
air to get in. This will keep odor and-mold from building up.