Levana LV-TW301 - Manuel (Page 14)

14
PAIRING CAMERAS
• This monitor has already been paired with the camera. You will need a pin
or small object to press the pair button to connect additional cameras
To Pair Cameras
1. Turn the monitor OFF using the ON/LCD OFF/OFF switch.
2. Press and hold the “+” brightness button on the right side of the front panel, and switch the
ON/LCD OFF/OFF switch to the ON position.
3. The monitor will turn ON and the pairing screen will be shown.
4. Once you see the screen above, switch on the camera you would like to pair. Using a pin
or small object, press the pair button through the small opening on the bottom of the camera.
5. The power LED on the camera will begin blinking when you have successfully pressed the pair
button.
6. The monitor and camera will now connect automatically, and the screen will show “Cam1 OK!”
7. Once you pair Cam 1, the monitor will prompt you to pair Cam 2, Cam 3, and Cam 4.
8. Repeat steps 4 through 6 to connect up to three additional cameras.
9. Once you have connected the number of cameras you would like, turn the monitor OFF and ON
again to resume normal operation.
Pair Button