Panasonic DVD-PV40 - Manuel (Page 15)

rrm
•If "0” appears on the screen
The operation is prohibited by the unit or
disc.
•When the disc ends
It you have finished using the unit, turn it
off to conserve po\wer page 14, “To
turn the unit off”).
•The surface of the unit may become
warm if it is used for a long time, but this
is normal and not an indication of mal­
function.
•The disc is still spinning while a menu is
on screen. Press [■] if you have finished
viewing.
•The [C!)] indicator on the unit flashes to
indicate the unit is on when the monitor's
mode is set to “4 (Off)" page 21) or the
outer cover is closed.
•You cannot use the remote control to
turn the unit on when it is being powered
by the battery pack.
•To prevent accidental operation
Slide [HOLD] to the left.
In the hold mode, the unit does not
respond when you press the buttons. If
you press a button in the hold mode,
“Ho Id"' appears on the unit’s display and
the [(!)] indicator flashes.
To release:
Slide [HOLD] to the right.
The position you stopped play at is record­
ed by the unit when the “RESUME" indica­
tor lights on the unit’s display.
( resume )
While “RESUME" indicator lights on the
unit’s display, press [►] (play) to start play
from where you stopped it (Resume func­
tion).
The following display also appears.
Press PLAY to Preview Chapters
Pressing [►] (play) while the message is
displayed, the beginning portions of each
chapter up to the current one are played
and full play resumes from the point where
you stopped play. (Chapter Preview)
(Chapter Preview feature works only with­
in a title.)
If you do not press [►] (play), the mes­
sage disappears and play starts from
where you stopped it.
■ To cancel
Press [■].
•The resume function does not work if the
disc’s play time is not displayed.
• It is cleared if you open the disc lid.
RQT5931