Panasonic DVD-PV55 - Manuel (Page 10)

Preparing the remote control Power supply
■ Replacing the button-type battery
The battery normally lasts for about a year.
Replace if the remote control fails to oper­
ate the unit when used within the operation
range.
Refer to
and 7.
“PRECAUTIONS” on pages 6
©jgagíSaii) ii5Kg@
Remote control
^ signal sensor
About 7 m
(23 feet) in
front of the
signal sensor •
• Do not expose the remote control signal
sensor to bright light.
• Do not place obstacles between the re­
mote control signal sensor and the re­
mote control.
•Do not use another unit’s remote control
at the same time.
The [(!)] indicator lights.
Front of this unit
Refer to “PRECAUTIONS” on page 6.
The unit is in the standby condition (the
[Cb] indicator lights) when the AC power
supply cord is connected. The primary
circuit is always “live" as long as the AC
adaptor is connected to an electrical
outlet.
■ When the unit is not going to be used
f o r a long time
The unit consumes 2 W when in standby
mode.
To conserve power, disconnect the AC
power supply cord from the AC outlet.
VQT8644