A. wv-cl830 (120v ac 60hz), B. wv-cl834 (12v dc/24v ac), 12 v dc power supply – Panasonic WV-CL834 Manuel d'utilisation
Page 9: Connections
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
CONNECTIONS
A. WV-CL830 (120V AC 60Hz)
1. Connect the AC power cord (supplied as standard
accessory) to the power cord socket of the cam
era.
2. Connect the AC power cord to an electrical outlet
of 120V AC 60 Hz.
Notes:
• Connect the power cord firmly.
• The power cord should be long enough for pan
ning and tilting.
If the cable is too short, the power cord plug may
pulled off the camera when the camera pans or
tilts.
B. WV-CL834 (12V DC/24V AC)
The WV-CL834 has an AC/DC compatible input termi
nal. The 12V DC or 24V AC power supply cord can be
connected to this terminal. The camera detects the
power source automatically.
Resistance of copper wire [at 20°C (68°F)]
1. 12 V DC Power Supply
Connect the power cord to
the AC/DC compatible
input terminal on the rear
panel of the camera.
12VDC
(10.5V- 16 V)
Copper wire
size (AWG)
#24
(0.22mm')
#22
(0.33mm^}
#20
(0.52mrTy)
#18
(O.BSmm')
Resistance
il/m '
0.078
0.050
0.030
0.018
Resistance
n/ft
0.026
0.017
0.010
0.006
Calculation
method
of
maximum
cable
length
between camera and power supply.
10.5V DC <
V
a
-
(R X 0.42 x L) < 16V DC
L : Cable length (meter)
R ; Resistance of copper wire (£i/meter)
V
a
: DC output voltage of power supply unit
L standard =
L minimum =
L maximum =
V
a
- 12
0.42 X R
V
a
- 16
0.42 X R
V
a
-
10.5
0.42
X
R
(meters)
(meters)
(meters)
-
7
-