Troubleshooting, Trouble shooting – Panasonic PanaSync E50 Manuel d'utilisation
Page 16
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
( Troubleshooting^
If the display unit fails, check the following before calling your dealer for service.
[^^^^ouWesteo^gChar^J
Ye&f-
N&:-
T rouble
Check and Remedy
Image is rwt displayed.
Is Power Indicator
on?
I NO r
YES
Connect power
cable.
Front panel
NO
YES
.----------------------------------- .
J
Power save functions
is operating.
Press "SELECT" button.
If white screen appears, check the following.
1. Check that computer and display unit are correctly connected
to each other.
2. Determirre if compufer is in power save mode by operating
the keyboard or mouse.
Does horizontal
size or vertical
size change when
adjusted?
NO
Is input sync frequency
within operating range?
Image size is too large
or small.
n
YES
Adjust to desired
size.
Is monitor video input
signal level the same as
video output signal level
from computer?
NO
Adjust video input signal
level and timing.
Character appears
indistinct.
YES
Check that brightness
and contrast are not
at minimum.
Image is too dark.
~ 14 —