Bissell PowerSteamer 1692 series - Manuel (Page 13)

Troubleshooting
Reduced Spray Or No Spray.
Possible Causes
O Bladder may be empty.
O
The Lint Screen may be clogged.
O Tank-in-Tank may not be seated properly.
O Pump may have lost prime.
0 The Pump Belt may be broken.
A WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug appliance from outlet
before servicing.____________
DirtLifter PowerBrush Does Not Turn.
Possible Causes
O The Brush Belt or Pump Belt may be broken. <
Remedies
Turn power OFF; refill tank with
hot tap water.
Clean out Lint screen page 7.
Turn power OFF; remove tank and
reseat tank.
O Turn power OFF; after 1 minute, turn
ON and depress Spray trigger.
Turn power OFF and unplug from
the outlet. To check if a Pump Belt
has b^en, you will need a flat
head screwdriver. Insert the
blade end into the lower slot of
the Belt Access door to release the
lower snap. If necessary, insert the
blade end into the upper slot to
release the upper snap. Examine
the belt for breakage. You should
be able to see the Pump Belt
looped around the motor shaft. If it
is broken or missing, please refer
to the part numbers and descrip­
tions on page 15 before calling
Consumer Services. Complete
installation instructions will accom­
pany the replacement belt.
Remedies
Turn power OFF and unplug
from the outlet. To check if a Brush
Belt has broken, you will need a flat
head (§) screwdriver. Insert the blade
end into the lower slot of the Belt
Access door to release the lower
snap. If necessary, insert the blade
end into the upper slot to release the
upper snap. Examine the belt for
breakage. If broken, refer to
pages 11-12.
08/09/05 19:05:01