The picture is dark, The picture is unclear, The picture is distorted – Sony CPJ-A300 Manuel d'utilisation
Page 25: The picture is noisy, No sound, The projector is warm, Appear on the screen
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Troubleshooting
(continued)
The picture is dark.
• Adjust the picture (p. 17 -19).
• Decrease the distance between the screen and the
projector to make the picture smaller (p. 6).
• Replace the bulb with a new one (p. 21).
The picture is unclear.
• Adjust the focus (p. 15).
• Project the picture perpendicularly against the screen
so that the image is rectangular (p. 5)
• Adjust the position and angle of the IR transmitter
and the mirror for the IR receiver (p. 14).
The picture is distorted.
• Place the projector so that the lens is perpendicular to
the projected plane.
• Adjust the angle with the stand (p. 11)
The picture is noisy.
• Check the connechon (p. 7 -10).
• Adjust the direction of the mirror for the IR receiver
(p. 14).
• The IR transmitter is too close to the IR receiver (p. 6).
• If the picture is still noisy, try connecting the
projector and video equipment using the supplied
A/V connecting cable (p. 8).
No sound
• Press VOL + (p. 15).
• Check the connection (p. 7 -10).
• Adjust the position and angle of the IR transmitter
and the mirror for the IR receiver (p. 14).
The projector is warm.
• This is normal and not a malfunction of the projector.
. Constant bright points of light (red, blue, or green)
appear on the screen.
• This is a characteristic of the liquid crystal screen and
not a malfunction of the projector.
6-EN Troubleshooting