Adjusting the hue (ntsc color system only), Adjusting the color intensity – Sony CPJ-A300 Manuel d'utilisation
Page 17
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Adjusting the picture
(continued)
2
Press + or - so that the picture contrast becomes
appropriate.
• For more contrast, press +.
• For less contrast, press
If you do not press any button, the display will go
off after 5 seconds.
Note
"HUE" does not appear
when the PAL color
system video signal is
input.
18-EN Adjusting the picture
Adjusting the hue (NTSC color
system only)
1 Press FUNCTION until "HUE" appears.
HUE
2
Press + or - so that the hue becomes appropriate.
• If the picture is too reddish, press +.
• If the picture is too greenish, press -.
If you do not press any button, the display will go
off after 5 seconds.
Adjusting the color intensity
1 Press FUNCTION until "COLOR" appears.
COLOR
2
Press + or - so that color intensity becomes
appropriate.
• For more color intensity, press +.
• For less color intensity, press -.
If you do not press any button, the display will go
off after 5 seconds.