Sony DVMC-DA1 - Manuel (Page 14)

Capturing images from an analog video unit using a PC (continued)
C' Tip
The DV still image
capture card kit DVBK-
CW200 for PC/AT
compatible or DV still
image capture board kit
DVBK-W2000 for PC/AT
compatible/DVBK-M2000
for Macintosh (not
supplied) can be used. For
details, refer to the
operating instructions of
DV still image capture
card kit or DV still image
capture board kit.
14
- ^
If you want to convert digital video to analog
video
Make the connection as follows:
•Connect the DV output connector of the PC to the
DV IN/OUT connector of the media converter using
the supplied DV connecting cable.
•Connect the input connectors of the analog video
unit to the AUDIO/VIDEO OUT connectors of the
media converter using the supplied audio/video
connecting cable.
Capturing images from an analog
video unit using a PC
You can capture the images from an analog video unit
using a PC which is connected via the media
converter.
"1
Press POWER to turn on the media converter.
2
Press ANALOG IN.
The key indicator lights up.
3
Start playback on the analog video unit slightly
ahead of the point from which you want to start
capturing images.
4 Start capturing procedures on your PC.
The operation procedures depend on your PC and
the software which you use.
For details on how to capture images, refer to the
instruction manual of your PC and software.
Recording analog video from a PC
1
Press POWER to turn on the media converter.
2
Press DV IN.
The key indicator lights up.
3
Start recording on the analog video unit.
4
Start outputting procedures on your PC.
The operation procedures depend on your PC and
the software which you use.
For details on how to output images, refer to the
mstruction manual of your PC and software.