Sony DVP-S3000 - Manuel (Page 9)

Getting Started
If your TV has an S-link connector
You can control the CD/DVD player from the TV.
Connect the TV via the S-LlNK connector using the S-link
cable (supplied). Refer to the instructions supplied with
the TV to be connected.
Audio/video/S-link connecting cord
CD/DVD player TV
Necessary Setup Before Using
the Player
Some setups are necessary for the player depending on
the TV or other components to be connected.
For details on using the menu, see page 42.
For details on each menu item, see pages 43 to 45.
■To connect the player to a wide-screen TV
In the menu, set "TV TYPE" in "INITIAL SETUP" to
"16:9."
■To connect the player to a normal TV
In the menu, set "TV TYPE" in "INITIAL SETUP" to
"4:3."
■To listen to the stereo sound through speakers
connected to a normal amplifier or through TV speakers
In the menu, set "DOWNMIX" in "INITIAL SETUP" to
"NORMAL."
■To listen to the sound through speakers connected to
an amplifier (or a TV) that conforms to Dolby Pro Logic
surround
In the menu, set "DOWNMIX" in "INITIAL SETUP" to
"SURROUND."
■To listen to the sound through speakers connected to
an amplifier with a digital connector or to output the
sound to a digital component such as a DAT or MD deck
When you play a DVD, set "DVD DIGITAL OUT" in
"INITIAL SETUP" to "PCM" in the menu.
When you play a VIDEO CD, set "VIDEO CD DIGITAL
OUT" in "INITIAL SETUP" to "ON" in the menu.
■To connect the player to a digital component with a
built-in Dolby Digital decoder
In the menu, set "DVD DIGITAL OUT" in "INITIAL
SETUP" to "AC-3 Digital."
"INITIAL SETUP" also includes other items such as
"VIDEO ASPECT RATIO" and "OSD LANGUAGE."
For details, see page 45.