Sony DVP-S3000 - Manuel (Page 8)

Getting Started
V If you have a digital component such as an amplifier
with a digital input connector, DAT or MD
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial cable
(not supplied).
When you play a DVD, set "DVD DIGITAL OUT" in
"INITIAL SETUP" to "PCM" in the menu, (page 45)
When you play a VIDEO CD, set "VIDEO CD DIGITAL
OUT" in "INITIAL SETUP" to "ON" in the menu, (page
45)
When using an opticai digital connecting cord
Optical digital connecting cord
cQn------------------------------------------ d b>
(not supplied)
Take off the cap and plug in the optical cable.
CD/DVD player
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
DIGITAL OUT
OPTICAL COAXIAL
gM/AC-3 DIGITAL
DIGITAL IN
OPTICAL
£T!i
TLf
s. )
When using a coaxial digitai connecting cord
Coaxial digital connecting cord
(not supplied)
CD/DVD player
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
Notes
• Refer to the instructions supplied with the component
to be connected.
• You cannot make digital audio recordings of discs
recorded in Dolby Digital (AC-3) format directly using
an MD deck or DAT deck.
Q’ If you have a digital component with a built-in Dolby
Digital decoder
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial cable
(not supplied). When the component with a built-in
Dolby Digital decoder is connected, the player plays
DVDs with sound recorded in Dolby Digital (AC-3)
format while producing the effect of being in a movie
theater or a concert hall.
In the menu, set "DVD DIGITAL OUT" in "INITIAL
SETUP" to "AC-3 Digital." (page 45)
When using an opticai digital connecting cord
Optical digital connecting cord
----------------------------------- CQ>
(not supplied)
Take off the cap and plug in the optical cable.
CD/DVD player
Component with a
built-in Dolby Digital
decoder
DIGITAL OUT
OPTICAL COAXIAL
I3M/AC-3 DIGITAI
DIGITAL IN
OPTICAL
)
When using a coaxial digital connecting cord
Coaxial digital connecting cord
^<zniD— ■ mzh
(not supplied)
CD/DVD player
Component with a
built-in Dolby Digital
decoder
DIGITAL OUT
OPTICAI COAXIAI
(j
PCM.'AC-3 DIGITA
DIGITAL IN
Note
Refer to the instructions supplied with the component to
be connected.
When you make the connections above, do not set
"DVD DIGITAL OUT" in "INITIAL SETUP" to "AC-3
Digital." If you do, a loud noise will suddenly
come out from the speakers, affecting your ears or
causing the speakers to be damaged.
8 ^