Aerus Lux 2000 - Manuel (Page 7)

7
Follow the steps listed below in order to ensure peak clean-
ing performance:
• Vacuum accessory brushes with end of hose handle after use
to remove debris from tools.
• Wipe tools occasionally with damp cloth or sponge and mild
detergent.
• Change bags and/or filters regularly. The afterfilter should be
replaced after the use of six filter bags.
• Periodically check revolving brushes for build-up of lint, hair,
or other foreign material and remove as necessary.
• Store cleaner in dry area-never outdoors.
• Have cleaner checked periodically by an authorized Aerus™
service facility.
NOTE:
Periodically inspect the ends of the hose
handgrip, wands, and the elbow or power nozzle.
Wipe these areas clean with a soft cloth.
TO REPLACE AFTERFILTERS:
Your Lux® 2000 includes the new high-efficiency electrostatic
afterfilter. This filter offers the most in advanced filtration to
ensure the air in your home will be the cleanest and freshest
possible. This new high efficiency afterfilter is available from
your local Aerus location.
NOTE:
The afterfilter should be replaced
after the use of six filter bags.
• Slide accessories off of clip.
• Gently press release latch (GG) and lift off the cover.
• Lift afterfilter (HH) out and replace with a new one.
• Engage the two tabs on the filter grill in the matching
openings on the canister and snap into place.
TO CLEAR CLOGGED HOSE:
• Slide accessories off of clip.
• Gently press release latch and lift off the cover (GG).
• Lift afterfilter out (HH).
• Attach machine end of hose (II) into blower attachment
receptacle. Place handle end of hose into a container.
• Turn the cleaner on and
blow object into container.
• Once hose is clear, press
the release on blower
attachment receptacle
and pull hose
out.
• Reinstall
afterfilter,
engage the
two tabs on the filter grill in the
matching openings on the canister and snap into place.
TO REPLACE FILTER BAGS:
Protect your Warranty! Always use genuine Aerus™ high-
efficiency, four-ply, self-sealing filter bags. Used exclusively,
the Aerus™ filter bag will promote longer motor life and more
efficient cleaner operation. Be sure the filter bag is in place
before operating the machine.
NOTE:
The filter bag may not appear completely full
when vacuuming fine dirt because this type of dirt clogs
the pores of the bag more quickly than coarse dirt.
However, if the machine shuts off due to overheating
protection, it is still time to change the filter bag in order
to restore cleaning efficiency.
• Stand the machine on its end and press the front cover
release (JJ).
• As the cover is opened, the filter bag seals itself for removal
(KK).
• Throw the old bag away–never attempt to re-use filter
bags.
• Install a new filter bag and close the cover.
JJ KK
GG HH
➡
II
MAINTENANCE
STORAGE
For best performance,
carefully store cleaner in a
dry place. Do not store out-
doors. Slide crevice tool and
combination dust brush/
upholstery tool onto the
accessory clip on canister
(LL). Use the hook on end of the
sheath to store the wand and
power nozzle as a unit (MM).
MM LL