SPYPOINT IR-A 4mp - Manuel (Page 13)

MEMORY CARD
The SD slot in the SPYPOINT camera model IR-A can accept
optional SD / MMC memory cards up to 2GB. Before
inserting or removing the memory card, the camera MUST be
turned off. Failing to do so may cause loss of photos or damage
to the memory card. When internal memory or SD card are
full, screen will show “FUL”. The following data shows an
approximate quantity of photos that can be recorded in the
camera depending upon the memory card capacity.
SETTINGS
Picture Quality, Date and Time
Turn off your camera, set the mode switch to «Set/Test» and set
the power switch to «ON». Press «MENU» once. The default
setting «H» (4MP) icon will flash. Use «DOWN» if you want to
change to «L» resolution (3MP). Press «MENU» button to set
date and time. Use «UP» and «DOWN» to change the blinking
number. Press «MENU» to set next option. Press «OK» and
turn off the system to record the changes. The camera’s internal
memory (32MB) can store approximately 65 pictures in 3MP
mode (low resolution) and 48 pictures in 4MP mode (high
resolution). The SD slot accepts optional SD/MMC card to
record more pictures.
4
English