SPYPOINT IR-A 4mp - Manuel (Page 12)

Main features of the surveillance camera
1. LCD mode display date, time and pictures number.
2. Adjustable PIR sensitivity.
3. Color day time images, black and white night
images.
4. Multi-shot of 1, 2, 3 or 4 pictures per detection.
5. Video length adjustable from 10 to 90 sec.
6. Ajustable delay between motion from 10 sec to
30 min.
7. NO FLASH uses 48 Infrared emitters to illuminate
the area.
8. Water-resistant housing case.
9. Date and time stamp on each picture.
10. Auxiliary power jack for external 12 V DC input.
POWER
Alkaline batteries
This camera requires 6 type “C” batteries. We recommend use
of alkaline batteries. Load batteries according to instructions
inside camera case. Exact polarity MUST be followed. The
battery life span is displayed on the LCD panel. The camera
will take pictures even if the batteries are half full, but we
strongly recommended that you replace them before they are
empty. (See figure below)
12V Power
Our SPYPOINT camera model IR-A can be used with an
external 12V DC input. When using 12V DC power, we
recommend removing alkaline batteries to prevent surcharges.
A 12V cable CB-12ft (sold separately) allow connecting the
camera to a 12V battery.
3
English