Traceall, Tone & probe instruction manual, English – Klein Tools VDV526-054 Manuel d'utilisation
Page 2

2
ENGLISH
TraceAll
™
Tone & Probe
instruction Manual
geneRal specifications
The Klein Tools TraceAll™ Tone & Probe is a portable device that assists in
tracing. It includes a tone generator that places a low voltage signal on the
line, and a tracer that detects and amplifies the signal.
•
dimensions:
8.9” x 1.7” x 1.2” (22.6 x 4.3 x 3.0 cm)
•
Weight:
5.0 oz. (140 grams) with battery and remote
•
operating temperature:
0 °C to 50 °C / 32°F to 122°F
•
storage temperature:
-20 °C to 60 °C / -4°F to 140 °F
•
Humidity:
10% to 90%, non-condensing
•
externally applied Voltage
without damage:
•
dc:
250V
•
ac:
175V RMS
•
battery life (typical)
:
•
tracer:
10 hours, 6V – 4 x LR44 alkaline batteries
•
generator:
50 hours, 6V – 4 x LR44 alkaline batteries
•
tone Voltage:
12 volts peak-to-peak no load, new battery
•
tone power:
8.9 dbm into 600 ohms, new battery
•
tone frequencies:
1116Hz and 919Hz ±5%
•
probe Replacement tip:
Cat No. VDV999-059
waRnings
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Connecting the TraceAll™ to live AC power may damage it and pose a
safety hazard for the user.
• Poorly terminated RJ plugs have the potential to damage the jack on
the TraceAll™. Visually inspect a RJ plug before inserting it into the
generator. The contacts should always be recessed into the plastic
housing of the plug.
Dwg Name:
VDV526-054-139633ART Dwg No: 139633
ECO No:
15819 Pkg Dwg Ref: 1718 Rev: C
Color Reference:
N/A
VDV526-054-139633ART.indd 2
3/6/14 9:14 AM