Operation and maintenance – Aquascape UltraKlean Pressurized Filter (95053 & 95054) Manuel d'utilisation
Page 7

1½”
1¼”
1”
¾”
1½”
1¼”
1”
remove
cut
here
cut
here
1½”
1¼”
remove
cut
here
1½”
remove
Hosetail ready for ¾” tubing
Hosetail ready for 1¼” tubing
Hosetail ready for 1” tubing
Hosetail ready for 1½” tubing
1
4
2
3
1
Water inlet
diffuser evenly
distributes debris
2
UltraKlean
™
BioBalls
™
provides efficient non-
clogging biological &
mechanical filtration
3
Debris filtered prior
to entering UV
4
Filtered water
7
www.aquascapeinc.com |
☎
CAN 1-866-766-3426 |
☎
US 1-866-877-6637
• select the Multi-Hose adapter based on the diameter of
the tubing you are using. it is recommended to use as
large of a diameter of tubing as possible (up to 1 ½ inch
diameter) in order to achieve maximum water flow.
• if using a diameter pipe larger than the smallest section
of the Multi-Hose adapter, trim off the smaller sections to
avoid flow restriction.
• we recommend using a hose clamp (not included)
to secure tubing onto the fitting.
• after completing the plumbing plug the pump and the
ultraKlean
™
pond filter to an outlet that is protected
by a ground fault interrupter (gfi). once the pump is
running and water is circulating through the ultraKlean
™
pond filter, check for any fitting leaks where the external
connections are made. since the filter is located outside
the pond even a small leak must be corrected.
NOTe: Do not use tools
to attach the fittings.
Installation of stainless steel hose clamp
OPEratiOn and MaintEnanCE
• the following diagrams illustrate the flow of water during
the “filtration” setting and the flow of water during the
“backwash” setting.
watEr FlOw dUring FiltratiOn
stainless
steel
hose
clamp
1½”
Kink-Free
tubing
95084 UltraKlean Pond Filter Instructions FINAL 12-13.indd 7
12/12/13 4:29 PM