Philips 10001708 - Manuel (Page 9)

7
4
9
3 2
5
7
6
8
1
«AQUA PRIMA» WATER FILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
recommended that you install the “Aqua Prima” water fi lter. After installation, go to the water fi lter
initialization program (see programming). By using this program, the machine advises the user when the
water fi lter must be replaced.
Place a container beneath the hot
water spout.
Turn the knob until the
position is reached. Water
dispensing begins.
Remove the Aqua Prima water
fi lter from its packaging. Enter the
date of the current month. Insert the water fi lter in its place
within the empty tank (see
fi gure);
Press down until it clicks into
place. Fill the tank with fresh drinking
water. Let the water fi lter soak in
the full tank for 30 minutes for
correct initialization.
on
reload water
fi lter
off
1.2.4 water settings
rinse
on
water
hardness
3/4
water fi lter
off
Have you replaced the old water
fi lter with a new one?
Access programming (see page
18 and 19). Press “water settings”.
Press “reload water fi lter”.
Press “water fi lter”.
Press the key to confi rm the
activation of the new water fi lter.
1.2.4.2. water fi lter
Once fi nished, the “close steam knob” message appears on the display. Turn the knob back to the rest position ( ).
Fill the water tank if necessary.
The machine is now ready for use and the “Aqua Prima” water fi lter control is active (see page 21).
1.2 machine settings
language & display
cup-warming
surface
water
settings
alerts and acoustic
settings