Philips 10001708 - Manuel (Page 23)

21
<WATER SETTINGS> «RINSE»
To clean the internal circuits in order to guarantee that the beverages are only made with fresh water. The
function is enabled as default by the manufacturer. Note: this rinse cycle is performed every time the machine
is turned on after the warming phase.
Press “water settings” and “rinse”.
water
settings
1.2.4.1. rinse
off
rinse
on
on
activate the rinse
cycle
deactivate the rinse cycle
In this menu you can:
<WATER SETTINGS> «WATER FILTER» MENU
To activate/deactivate the warning to replace the “Aqua Prima” water filter. The machine informs the user
when the “Aqua Prima” water filter needs to be replaced.
Press “water settings” and “water filter”.
water
settings
1.2.4.2. water fi lter
off
water fi lter
off
on
activate the control deactivate the control
In this menu you can:
reload water
fi lter
Important note.
This setting automatically adjusts the parameters which allow the user to perform correct machine maintenance.
Select:
on: only when the “Aqua Prima” water fi lter is installed in the water tank as shown on page 7.
This function is automatically activated after selecting “reload water fi lter”.
off: when there is no “Aqua Prima” water fi lter in the water tank.
reload water fi lter: when a new “Aqua Prima” water fi lter is installed in the water tank.
proceed with the initialization
(cleaning) of the water fi lter.