Operation, Before first use, Operating instructions – Bonavita BV3825B Manuel d'utilisation
Page 5

OPERATION
Before first use
Remove all packaging materials, labels and/or stickers from your kettle.
Clean your kettle thoroughly before using for the first time ( Cleaning).
Boil water at least 2 times and dispose, before boiling water for consumption.
Remove the kettle from the base (7). Take off the lid (2).
Fill the kettle with water (ill. A)
After filling the kettle with water, insert the lid (2) into kettle with holes facing
towards handle.
After filling the kettle with water, insert the lid (2) into kettle with holes facing
towards handle.
up to the max 1.0 marking
Connect the power plug (8) to a wall outlet (ill. B) . Press down the I/0 switch (5) to
on position to start boiling the water (ill. C).
The indicator light (6) lights up. After boiling is finished, the kettle turns off
automatically. Dispose of the hot water in the sink.
WARNING: Be careful when handling hot water. Danger of scalding!
Let the appliance cool down 1 minute before boiling water again. Repeat this
process before using water for consumption.
WARNING: Do not immerse the base (7) or the kettle in water or any liquids. This may
cause electric shock or damage the appliance.
Operating instructions
Before plugging the kettle into the wall outlet, check that the electrical circuit is not
overloaded with other appliances.
Set the base (7) on a flat, even and steady surface.
Remove the kettle from the base (7). Take off the lid (2).
Fill the kettle with water (ill. A) under the max 1.0 marking. Do not fill over the
max marking. See the water level (3) for adding the desired amount of water.
Connect the power plug (8) to a wall outlet (ill.B).
Press down the I/0 switch (5) to on position to start boiling the water (ill. C ). The
indicator light (6) lights up.
After boiling is finished, the kettle turns off automatically.
Let the appliance cool down 1 minute before boiling water again.
Pour the hot water into a heat resistant container (ill. D).
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Manually interrupt the boiling process by lifting up the I/0 switch (5) to off position
(ill. E).
After each use remove the power plug (8) from the wall outlet (ill. F).
WARNING: The appliance is very hot during use. Do not touch (ill. G) . Danger of
burns!
WARNING: Never leave the kettle unattended while boiling water. Especially when there
are children nearby.
WARNING: Do not open the lid (2) while boiling water.
•
•