Yorkville FH2W - Manuel (Page 2)

w w w . y o r k v i l l e . c o m
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA
Canada
Voice: (905) 837-8481
Fax: (905) 837-8746
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
U.S.A.
Voice: (716) 297-2920
Fax: (716) 297-3689
Printed in Canada
2
Step 1 - Preparing the Enclosures
Remove the four flyware bolts on top of the enclosure to be flown.
Step 2 - Attaching the Bracket
Secure the FH2 bracket to the top of the enclosure using the four supplied washers
and bolts. Tighten the bolts in an alternating diagonal pattern. Tighten each bolt gradu-
ally, following the diagonal pattern until all are firmly secured.
Tip: To make sure that the bolts don’t become loose over time, use a bolt thread-lock-
ing agent (such as LoctiteTM, PermabondTM or Sur-LokTM brands). This will help to
keep the bolt locked in place.
Note: The FH2 kit includes a support plate that will only be used when con-
joining two enclosures together, it is NOT used when the FH2 is mounted on
an individual enclosure.
Mounting the FH2 Bracket on Adjoining Enclosures
The versatile FH2 bracket has also been designed to allow multiple enclosures to be
flown together. In order to fly conjoined enclosures, follow these simple instructions.
Step 1 - Preparing the Enclosures
Remove the two top and two bottom flyware bolts closest to the neighboring side of
each enclosure to be conjoined.
Flyware Bracket System