Yorkville FH1W - Manuel

w w w . y o r k v i l l e . c o m
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA
Canada
Voice: (905) 837-8481
Fax: (905) 837-8746
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
U.S.A.
Voice: (716) 297-2920
Fax: (716) 297-3689
P
rin
te
d
in
C
an
ad
a
1
This hardware kit has been specifically designed to expand your enclosure’s already
advanced mounting capabilities.
IMPORTANT!! The rigging of loudspeaker systems is an extremely serious matter. Overhead rigging
requires extensive experience, including (but not limited to) calculating working load limits, hardware instal-
lation, and periodic safety inspection of all hardware and cabinetry. If you lack these qualifications, do not
attempt the installation yourself, but instead use a professional structural rigger. Improper installation can
result in bodily injury or death. Consult a structural engineer to calculate added loads upon the building.
Structural reinforcement may be necessary to insure a safe installation.
The FH1 System
The FH1 installation system has been developed to expand the ver-
satility and simplicity of installing enclosures in multi-box arrays.
The FH1 kit allows enclosures to be mounted in two or
more cabinet arrays with greater ease than employing
individual three-point hangs for each cabinet. (An ardu-
ous chore when attempting to install clusters of loud-
speakers using standard eyebolts, shackles and
cables. The FH1 is easily mounted strategically to
the top and bottom of the enclosure.
Flying Arrays
A single FH1 kit allows a pair of cabinets to be
clustered in a tight-pack array at their optimum
splay and more can be attached together for larg-
er clusters (3 or more enclosures).
Yorkville FH1
Kit Includes
2 Z761 Cross Member Supports
2 Z762 Shackle Cross Members
4 Z763 Support Plates
8 YS#8920 3/8-16 X 2 HH GRD 5 ZP BOLT
4 YS#8996 3/8-INCH SPLIT WASHER BLACK
Flyware Bracket System
Z761 x 2 Z762 x 2 Z763 x 4 YS#8920 x 8