Napoleon Fireplaces FIBERGLOW GL18E - Manuel (Page 8)

8
W415-1071 / C / 01.11.12
4.0 FINISHING
4.1 ANDIRON AND GRATE ASSEMBLY
A. With the 2 andirons laying face
down, secure the grate overtop
using two ¼-20 bolts (supplied in
the manual baggie).
B. Install the grate/andiron assembly
to the burner base using four 1 ¼”
self tapping screws (supplied in the
manual baggie).
1
2
USE ONLY ACCESSORIES
DESIGNED FOR AND
LISTED WITH YOUR
SPECIFIC LOG SET.
4.2 BATTERY INSTALLATION
A. Remove all the logs.
B. The battery pack is located at the rear right corner
of the burner behind the pilot. If there is room, slide
the battery pack out to the right, otherwise lift up
carefully, making sure that the wires connected to
the battery pack do not become entangled.
C. Unfasten the Velcro and replace the 4 AA batteries.
D. Replace battery pack and log set (see “LOG
PLACEMENT” section).