Sony STR-DA5200ES - Manuel (Page 102)

102 GB
Notes
• Sound adjustments do not affect the signal output
from the TAPE/CDR OUT or MD/DAT OUT
jacks.
• The audio signals input to the MULTI CHANNEL
INPUT jacks are output only from the front left/
right channels.
To record digital sound
Connect a component for playback to the
digital audio input (OPTICAL IN) jack, and
connect the recording component to the
OPTICAL MD/DAT OUT jack.
1
Press the input button of the
playback component.
2
Prepare the component for
playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc., into the
recording component (VIDEO 1 or
VIDEO 2) for recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the sources.
• The audio signals input to the MULTI CHANNEL
INPUT jacks are output only from the front left/
right channels.
Listening to the sound in
another zone
(ZONE 2/ZONE 3
operations)
You can enjoy images and sounds from a
component connected to the receiver in a zone
(zone 2 or zone 3) other than the main zone.
For example, you can watch the DVD in the
main zone and listen to the CD in zone 2 or
zone 3.
When using an IR repeater (not supplied), you
can also operate both a component in the main
zone and Sony receiver in zone 2 or zone 3
from zone 2 (or 3). Use the RM-AAU009
remote for the operation.
• Switching the output source for the ZONE 2
or ZONE 3 OUT jacks.
• Switching the Sony receiver’s power on or
off in zone 2 or zone 3.
Recording onto recording media