Sony PCV-LX810 - Manuel (Page 49)

Removing, Installing, and Replacing Components 35
Installing System Memory
1
If necessary, remove the memory module you wish to replace (see
“Removing a Memory Module” on page 37).
2
Remove the new memory module(s) from its anti-static package. Hold the
memory module only by its edges to prevent static-electricity damage.
3
Choose the size and configuration of the memory module as shown in the
following table. Memory modules can vary in size and speed between
sockets. The minimum memory size is 8 MB; the maximum memory size is
512 MB. The BIOS automatically detects the type, size, and speed of the
memory modules.
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.
Memory module configurations (MB)
DIMM1 DIMM2
0, 8, 16, 32, 64, 128, 256 0, 8, 16, 32, 64, 128, 256
!
Touch any exposed metal part of the chassis to discharge static electricity in
your body before handling a memory module.
✍
Use only 3.3 V 64-bit, PC-133 MHz SDRAM DIMM modules.