Sony HVL-MT24AM - Manuel (Page 110)


Custom setting
The various flash settings can be changed as necessary.
The following three items may be changed.
 Time to auto power off (4 minutes/15 minutes/60 minutes/None)
 Recording modes in which manual flash may be set
(M mode only/All modes)
 Manual-flash power-level steps (1EV increments / 1/2EV increments)
1
Press the flash ON/OFF button for three seconds.
The auto lamp, flash-ON lamp and flash-OFF lamp all come on together, and
the item (time to auto power off) is displayed.
2
Press the A-B button (twin-flash A-B selection button) to
select the item, and press the TTL/M/Test button to select
the desired setting.
Each time the A-B button is pressed, the above three items appear on the
control panel (see following page).