STEINEL FL 300 - Manuel (Page 5)

The shrouds are made up of six 10°
sections which can be snapped or cut off
individually. The shrouds can be easily
clipped on to the unit without changing
the lens.
Coverage adjustment - shrouds
Coverage adjustment - lens rotation
The sensor’s fi eld of view can be aimed
130° horizontally and 65° vertically to best
meet the application requirements.
The sensor should not tilt to face upwards
but should be aimed at least 15° below
horizontal for ideal detection.
Aim N’ Lock - light adjustment
STEINEL’s unique Aim N’ Lock lampholders
do not require tools and ensure that
lampholders remain locked in place without
sagging or becoming loose over time.
Each lampholder can be adjusted in two
locations. To rotate the lampholder’s arm,
(for vertical direction of lamp) simply pull
out, align to desired position, and push in
to lock back in to place. The lampholders
can also swivel to aim the lamps
horizontally as needed.
Setup & Commissioning (continued)
Coverage size
With an installation height of 8 to 12 feet,
maximum reach is 40 feet. If needed,
the detection zone can be adjusted (see
below).
Coverage may vary depending on
mounting height and environmental
conditions.
Shrouds snap in place allowing users
to adjust coverage. Shrouds cover any
desired number of lens segments and
reduces coverage. Undesired detection of
cars, pedestrians, etc. outside the desired
detection range can be eliminated.
8
Split zone Left or right side only Narrow-alley zone
It is best to make fi nal adjustments to
the lampholders after installation. This
will give you the opportunity to maximize
your light coverage and to also be
certain the lamps are not blocking any
part of the viewing angle of the sensor.
It is recommended that the lamps be
positioned out and above the sensing
plane.
NOTE: For safety, adjustments to Aim N’
Lock lampholders should be made before
screwing in light bulbs.
NOTE: The FL300 accepts PAR 38 fl ood
lamps. Make sure lamps seat properly in
lampholders to ensure contact.
9
max 40 ft
8 ft
www.steinel.net (800) 852-4343 www.steinel.net (800) 852-4343