STEINEL FL 300 - Manuel (Page 2)

Product Overview
120V
60Hz
PIR
IP54 140°
Applications
• Exterior: entryways, carports,
balconies, patios
Intended uses
• Suitable for automatic switching of
lights
• NOT suitable for alarm systems
Environmental considerations
• Weather can affect operation of the
sensor. Strong gusts of wind, snow,
rain and hail can cause switching
errors since the sudden temperature
changes cannot be distinguished from
heat sources.
FL 300 outdoor sensor with
dual lampholders
One crossbar
Two washers
Two nuts
One 3” chase nipple
Four mounting screws
Needed for installation
Exterior wall mount installation:
• weatherproof double-gang junction
box with gasket (mounting screw holes
are 5.25” apart)
Exterior wall mount installation without
double-gang box:
• crossbar (included)
• weatherproof silicone caulk
Soffi t mounting:
• weatherproof junction box
• 1/2” threaded coverplate with foam
gasket and coverplate screws
Package Contents
Installation Overview
Two 1/2” Phillips screws
Two shrouds
Two wire nuts
One standard backplate (wall
mounting)
One solid backplate (soffi t
mounting)
Installation instructions
www.steinel.net (800) 852-4343
WARNING
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate electrical codes
and regulations
• Installation by a qualifi ed electrician is recommended
Voltage 120 VAC, 60 Hz
Load rating 0-300 watt Tungsten
Time delay 10 seconds to 15 minutes
Light level .2 - 200 footcandles, 2 - 2000 lux
Environment Rated IP54 raintight, -40°F to +120°F, -40°C to +49°C
Lamps accepts type PAR 38, max two 150 watt Tungsten lamps (not included)
Swivel range 130° horizontal, 65° vertical
Coverage 140°, up to 40 foot reach
Dimensions 5 x 11.5 x 5 in, 127 x 292 x 127 mm
5 year warranty
UL Listed, CSA Approved, RoHS Compliant
Product description
Specifi cations
The FL 300 combines an outdoor
occupancy sensor with dual lampholders.
Lights turn ON automatically when
presence is detected and OFF when the
area is left vacant, enhancing security,
convenience and energy savings.
www.steinel.net (800) 852-4343
2
Aim N’ Lock lampholders
Backplate
Fixture (top)
Aim N’ Lock adjustments
Time and light level settings
Standard PAR lamp
Snap on shroud
Vertical and horizontal sensor adjustments
Soffi t mount plug
1
5
2
6
3
7
4
8
9
3
Dual
Mount:
Wall or
Soffi t
140°coverage angle
Installation Instructions
Installation Instructions
FL300W FL300B
English
Made in E.U.
Français
RoHS Compliant