Bosch HBLP751UC - Manuel (Page 26)

English 23
time. This is normal and does not affect operation. Do
not use scouring pads or abrasive cleaners to treat
discolorations.
• In double oven models: Self Clean is only available for
one oven at a time. The other oven must be turned off.
Avoid These Cleaners
Do not use commercial oven cleaners such as Easy Off®.
They may damage the oven finish or parts.
Never use scouring pads or abrasive cleaners. Never use
cleansers containing Clorox ®
Do not use flammable cleansers such as lighter fluid or
WD-40.
Cleaning Guide
Maintenance
Replacing an Oven Light
Part Recommendations
Flat Rack Wash with hot soapy water. Rinse
thoroughly and dry, or gently rub
with cleansing powder or soap-filled
pads as directed. DO NOT clean the
rack in the self cleaning oven.
If flat racks are cleaned in the oven
during the self clean mode, they will
loose their shiny finish and may not
glide smoothly. If this happens wipe
the rack edges with a small amount
of vegetable oil. Then wipe off
excess.
Telescopic Rack Wash with soapy water. Rinse
thoroughly and dry, or gently rub
with cleansing powder or soap-filled
pads as directed. Avoid getting
cleansing powder in the telescopic
slides. Re-lubrication may become
necessary. Use only high-
temperature food-grade lubricants to
re-lubricate slides.
DO NOT clean the rack in the self
cleaning oven. DO NOT leave the
rack in the oven during self clean.
If the telescopic rack is cleaned in
the oven during the self clean mode
it will loose its shiny finish and will
not glide smoothly.
Fiberglass
Gasket DO NOT CLEAN GASKET.
Glass Wash with soap and water or glass
cleaner. Use Fantastik® or Formula
409® to remove grease spatters and
stubborn stains.
Painted
Surfaces Clean with hot soapy water or apply
Fantastik® or Formula 409® to a
clean sponge or paper towel and
wipe clean. Avoid using powder
cleaning agents, steel wool pads
and oven cleaners.
Porcelain
Surfaces Immediately wipe up acid spills like
fruit juice, milk and tomatoes with a
dry cloth. Do not use a moistened
sponge/cloth on hot porcelain. When
cool, clean with hot soapy water or
apply Bon-Ami® or Soft Scrub® to a
damp sponge. Rinse and dry. For
stubborn stains, use soap-filled
pads. It is normal for porcelain to
show fine lines with age due to
exposure to heat and food soil.
Stainless Steel
Surfaces Always wipe or rub in the direction of
the grain. Clean with a soapy
sponge, then rinse and dry, or wipe
with Fantastik® or Formula 409®
sprayed on a paper towel. Protect
and polish with Stainless Steel
Magic® and a soft cloth. Remove
water spots with a cloth dampened
with white vinegar. Do not use any
abrasives such as steel wool pads,
SoftScrub®, BonAmi® or Clorox ®
cleansers.
Plastic &
Controls When cool, clean with soapy water,
rinse and dry. Do not use any
abrasives such as steel wool pads,
SoftScrub®, or Bon Ami®.
Probe Wipe with soapy water. Do not
submerge. Do not wash in the
dishwasher.
Printed Areas
(Words and
Numbers) Do not use abrasive cleansers.
When cool, clean with soapy water,
rinse, dry.
9 WARNING
Part Recommendations