MAX GS732C - Manuel (Page 17)

17
REMOVING THE PIN
1 Pull the Follower Holder and press the Follower,then return
the Follow Folder.
2 Set the Magazine vertical and push the Nail Stopper to re-
move the Pin. Be sure that no pins remain in the Nose or
Magazine.
CHANGING THE HOOK DIRECTION
• Remove the Fuel Cell and Battery.
The Hook can be directed in the two directions. Remove the hex-
agon socket head cap screw with hexagon wrench, change the
direction, and then, put back the bolts to reassemble.
REPLACING THE FUEL CELL
If the Fuel Gas is low, the pins cannot be driven.
• Be sure to remove the Battery.
• Be sure to release the Trigger.
• Do not press the Contact Arm against the object.
1 Press the Latch, then pull the Fuel Cap.
Follower
Holder
Pin
Follower
Nail Stopper
Pin
Hexagon Socket
Head Cap Screw
Hook
WARNING
WARNING
Fuel Cap
Fuel
Cap
GS738C_USA.book 17 ページ ２０１１年８月２４日 水曜日 午後５時０分