MAX GS732C - Manuel (Page 12)

12
HOW TO USE THE CHARGER
The special purpose charger Base (Cat.#55638) has the LEDs (green, red) which indicate the status of the charger and Battery.
Battery Charger problems
The following cases are considered to be the problems. Replace the charger and Battery with new ones.
• The green LED is not turned on if the power plug of the charger is plugged into a 100-240 V AC (for household use) plug socket. (With
the Battery unset)
∗ Check with another electric appliance to see whether electricity is available at the plug socket.
• Neither green nor red LED is turned on or blinks if the Battery is set in the Charger.
• The green LED is not turned on 150 minutes after the red one has been turned on.
• The red LED is not turned on if the Battery is set in the charger.
Green LED Red LED Status Description
1. ON OFF Power-on The charger has been plugged in. (Power-on status:Battery unset)
2. OFF ON Charging The Battery is being charged.
3. ON OFF Charge Completed The Battery has been completed charged.
4. Blinking Blinking High temperature
alarm
The Battery is hot. (Remove it from the Charger and cool it down for
a while before charging.)
5. ON ON Battery alarm The Battery is defective. (Replace it with a new one)
6. Blinking ON Battery high
temparature alarm
The Battery is defective and hot. (Replace it with a new one.)
GS738C_USA.book 12 ページ ２０１１年８月２４日 水曜日 午後５時０分