GE Industrial Solutions Evolution Switchboards - Manuel (Page 22)

EEvvoolluuttiioonn SSeerriieess™ ™ SSw wiittcchhbbooaarrddss
Chapter 3- Splicing the Switchboard
2222
FFiigguurree 3300.. Splicing diagram for individually mounted
main/feeder, utility, or incoming lug pull sections to
individually mounted main/feeder, utility, or incoming lug
pull sections with 400- 1200A aluminum or copper neutral
bus.
Splices are secured and located hanging vertical on the
neutral bus. To join to the adjacent section, the bolt has to
be removed and the splice rotated 90 degrees to be in
horizontal position to connect to the adjacent neutral bus.
Reinstall bolt and re-torque according to Table 1 in this
manual.
FFiigguurree 3311. Splicing diagram for individually mounted
main/feeder, utility, or incoming lug pull sections to
individually mounted main/feeder, utility, or incoming lug
pull sections with 1600–4000 A aluminum or copper neutral
bus.
Splices are secured and located hanging vertical on the
neutral bus. To join to the adjacent section, the bolt has to
be removed and the splice rotated 90 degrees to be in
horizontal position to connect to the adjacent neutral bus.
Reinstall bolt and re-torque according to Table 1 in this
manual.
Neutral Bus Splices