Rose electronic Crystal View - Manuel (Page 18)

SYSTEM OVERVIEW
CrystalView Installation and Operations Manual
12
In this configuration, the local unit can be either a Dual or Single model.
Figure 1. Typical Installation
A powered or non-powered microphone can be connected to the Remote Units
“Line In” connector. The Local Unit “Line Out” is connected to the MIC input on
the CPUs sound card.
A standard DB9MF serial cable is used to connect the serial port on the Local
Unit to the DB9 serial port on the CPU. A serial device is then connected to the
Serial port on the Remote Unit.
Custom cables are available, contact Rose’s technical support for assistance.