Roland DIGITAL STUDIO WORKSTATION VS-2480 - Manuel (Page 47)

47
Making a Multi-Track Recording
Making a Multi-Track
Recording
fig.03-34
2. Press [TR 1-16 (MASTER EDIT)]. [TR 1-16 (MASTER EDIT)]
indicator will light, [CH EDIT] will be the Channel Edit
button of the Track Mixer channel 1–16.
3. Press [CH EDIT] of the track that you wish to adjust the
equalizer. [CH EDIT] indicator will light.
fig.03-40_35
4. Press [PRM EDIT]. [PRM EDIT] indicator will light red.
5. Turn the “Freq,” “Gain,” and “Q” knobs for “EQ Low”–”EQ High” to
adjust the tonal character.
6. If you wish to adjust of other tracks, repeat Steps 3–5.
7. When you finish playback, press [STOP].The project playback will stop.
8. Press [HOME (DISPLAY)]. Home Condition screen will appear.
fig.03-41_50
■ Use the Filter To Adjusting the Tone of Each Track
The channels are provided with filters. There are four kinds of filters; you can use
any one of these to adjust the tonal quality of the sound.
Try using the filter to adjust the sound quality of each track.
fig.03-42_50
1. Press [PLAY]. The project will
playback.
fig.03-34
2. Press [TR 1-16 (MASTER EDIT)]. [TR 1-16 (MASTER EDIT)]
indicator will light, [CH EDIT] will be the Channel Edit
button of the Track Mixer channel 1–16.
IN 1-16
SOLO
FX RTN
IN 17-24
AUX MST
TR 17-24 TR 1-16
FADER
MUTE
MASTER
EDIT
V.FADER
If you set the Track Mixer
17–24, press [TR 17-24/FX
RTN (V.FADER)]
.
TRACK STATUS / PHRASE PAD
IN 1-16
SOLO
9 12 1 2 3 4 5 6 7 8
TO
FROM
13 14 15 16 10 11
AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8
PAN / AUX SEND 1-8
CH EDIT / SELECT / PHRASE SEQ STATUS / AUTOMIX STATUS
FX RTN
IN 17-24
AUX MST
TR 17-24 TR 1-16
Q Q RATIO GAIN FREQ FREQ GAIN FREQ GAIN GAIN FREQ THRESHOLD ATTACK RELEASE LEVEL FREQ
EQ Low EQ High
FADER
WRITE
READ
MANUAL
PRM
MUTE
EQ Lo - Mid EQ Hi - Mid Dynamics
PHRASE
REC
PLAY
OFF
TRACK
PHRASE SEQ
MASTER
EDIT
V.FADER
EDIT
PHRASE
PAD PLAY
AUX
SEND
PHRASE
SEQ
PAD
/ AUTOMIX
Filter
3
5 4
When the [PRM EDIT]
indicator is dark, these
knobs will be the PAN
knobs.
The “Q” parameter can be
adjusted only for “EQ
Lo-Mid” and “EQ Hi-Mid.”
You can adjust the EQ
parameters from the
Channel Edit screen.
When the equalizer switch
is turned off, no change is
made in the tonal quality
even if a parameter is
changed. If you do want to
change the tonal quality,
you must first turn the
equalizer switch on, either
in the Parameter Edit
screen or the Channel Edit
screen.
PAGE F1 F2 F3 F4 F5 F6 HOME
DISPLAY
8
AUTOMIX REC RESTART STORE
ZERO STOP PLAY REC
SHUT / EJECT
1 9
IN 1-16
SOLO
FX RTN
IN 17-24
AUX MST
TR 17-24 TR 1-16
FADER
MUTE
MASTER
EDIT
V.FADER