Method of use, Operation of the odor sensor – Sanyo ABC-VW24A Manuel d'utilisation

Page 9

Advertising
background image

E-8

Press

Press

Press

When cleaning the air and removing
odors in the room automatically

Method of Use

Operation of the Odor Sensor

1

2

AUTO

LOW

MED

HIGH

Note:

¡

Toxic substances (carbon monoxide, etc.) from cigarettes cannot be eliminated.

¡

Odor components (odors from building material, pets, etc.) that are continuously generated
cannot be entirely eliminated.

Color of Clean Indicator and Operating Status (Air flow indicator lamp does not turn on)

The generated volume of sterile, electrolytic mist is intermittent with Low (small) and Strong (large).

The odor sensor operate automatically when set to automatic operation mode.

¡The odor sensor responds to cigarette smoke, insecticides, cosmetics, alcohol, gases generated by burning

appliances, and sudden changes of temperature and humidity.

Cleanliness

Color of Clean Indicator

Operating

Status

Fan

Sterile, Electrolytic Mist

Green

Yellow

Red

Stop

Low

Medium

Stop

Low

Low or Strong

Clean

Very Dirty

Manual Operation

The device can be operated according to preference. Normally, it is recommended that automatic operation is
selected to operate automatically in response to the cleanliness of the air. When the automatic operation, adjust
the sensitivity of the odor sensor (refer to page E-7).

Press the power on/off button.

¡Press the power on/off button to operate in [AUTO/Electrolyzed

Water “On”] mode after plugging in the power plug.

¡The electrolyzed water and clean lamps turn on.

(The electrolyzed water lamp turns on while operating the
electrolyzed water function).

Press the fan speed button and operate according
to preference.

¡The operating mode switches with each press of the button and

the mode is indicated by the corresponding lamp.

¡Press the fan speed button and operate in “AUTO”.
¡Operates automatically when the odor sensor detect dirt or

odor in the air of the room.

¡A sterile, electrolyzed mist is produced (the electrolyzed

water function generates a sterile, electrolyzed mist).
Press the electrolyzed water button to turn off the
electrolyzed water.

¡The electrolyzed water function cannot be operated

independently.

* Even when the air of the room is clean, the electrolyzed

water function operates silently for about 5 minutes, once
every hour, to agitate the water.

Automatic Operation

English

ABC-VW24A_GB_US.qxd 09.10.1 4:52 PM ページ8

Advertising