Sanyo ABC-VW24A - Manuel (Page 6)

E-5
Tabs
Filter
Supports
Pre-filter
Plastic Protector FRONT
Filter
Filter
Pre-filter
Net
Filter
Supports
Pre-filter
Attachment
Slots
w
q
q
Release Button
Press
Press
Front Cover
w
e
Tabs
Front
Cover
q
Tabs
Tabs
Preparations Before Use
Installing the Filter
1
3
2
4
5 6
Note:
¡ Always be sure to install the pre-filter, filter and front cover before operating the unit.
¡ If the plastic protector is not removed from the filter, the device will not clean the air.
In addition, this may cause a malfunction.
¡ Write the date of the filter installation on the date label as a guide for the filter replacement and
attach the label to the unit.
Remove the pre-filter (filter).
¡Hold the tabs of the pre-filter and pull to remove.
Remove the front cover
¡ q Press the Release buttons (both sides) at
the bottom of the unit, w pull the front cover
away from the unit, and e lift.
Attach the filter to the pre-filter.
¡Insert the side printed with the word “FRONT”
into the side of the net.
Remove the pre-filter from the filter
and remove from the plastic protector.
¡Widen the frame of the pre-filter and remove
the filter.
Attach the front cover.
¡ q Place the tabs (3) at the top of the front cover
into the attachment slots.
¡ w Press the bottom until the cover clicks.
Attach the pre-filter.
¡Ensure that the tabs of the pre-filter are to the
front. q Insert the filter under the filter supports
at the top and then w push the filter in at the
bottom.
ABC-VW24A_GB_US.qxd 09.10.1 4:52 PM ページ5