Shindaiwa PowerBroom 80732 - Manuel (Page 6)

6
ENGLISH
Specifications
PB2500 Dry Weight (less sweepers) ............................................................ 4.7 kg/10.4 lb.
PB2500 Dry Weight (Including sweepers) .................................................. 9.5 kg/21.0 lb.
Engine Model ........................................................................................ Shindaiwa SF2500E
Engine Type ..................................................... Shindaiwa C4, vertical-cylinder, air-cooled
Bore x Stroke .................................................................................. 34 x 27 mm/1.3 x 1.1 in.
Displacement ............................................................................................. 24.5 cc/1.5 cu. in.
Maximum Power Output .......................................... 1.1 HP (0.8 kW) @ 7500 rpm (min -1 )
Fuel/Oil Ratio ........................................ 50:1 with Shindaiwa Premium 2-cycle mixing oil
Fuel Tank Capacity ....................................................................................... 600 ml/20.3 oz.
Carburetor Type ................................................................... Walbro WYL, diaphragm-type
Ignition ............................................................. One-piece electronic, transistor-controlled
Spark Plug ......................................................................................................... NGK CMR6H
Air Cleaner Type ..................................................... Non-reversible flocked filter element
Starting Method ............................................................................................................ Recoil
Stopping Method ................................................................................................. Slide switch
Transmission Type ............................................ Automatic, centrifugal clutch w/worm gear
EPA Emission Compliance Period* ................................................................... Category A
Prior to Assembly
Before assembling, make sure you have
all the components required for a com-
plete unit:
■ Engine assembly
■ Outer tube assembly
■ Drum kit w/gearcase
■ Correct operators handle (see preced-
ing page)
■ Kit containing operator’s handle and
hardware, this manual and tool kit for
routine maintenance. Tool kits vary by
model and may include a hex wrench,
spanner and a combination spark plug
wrench/screwdriver.
Carefully inspect all components for
damage.
IMPORTANT!
The terms “left”, “left-hand”, and “LH”;
“right”, “right-hand”, and “RH”; “front”
and “rear” refer to directions as viewed
by the operator during normal operation.
*Specifications are subject to change without notice.
*The EPA emission compliance period referred to on the emission compliance label located on the engine, indicates the
number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50
hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended)
PB03
Unit Description
Outer Tube
Grip
Using the accompanying illustrations as a
guide, familiarize yourself with this unit
and its various components. Understand-
ing the product helps ensure top perform-
ance, long service life, and safer opera-
tion. See Figure 4.
WARNING!
Do not make unauthorized modifica-
tions or alterations to this unit or
components. Gearcase
Throttle
Trigger
Tank
Protector
Figure 4
Ignition
Switch
Spark
Plug
Fuel
Tank
Sweeper
Belt
Sweeper
Drum
Handle