Adjusting dolby digital audio, Using dynamic range control – Insignia NS-FSDVDR Manuel d'utilisation
Page 26
25
Insignia NS-FSDVDR DVD recorder
www.insignia-products.com
7 Press
or to select an option, then press
ENTER.
•
48kHz—Select this option if your amplifier
or decoder is not compatible with 96 kHz
PCM. With this setting, 96 kHz sound is
output at 48 kHz.
•
96kHz—Select this option if your amplifier
or decoder is compatible with 96 kHZ
PCM.
8 Press SETUP to close the menu.
Adjusting Dolby Digital audio
If your recorder is connected to a Dolby Digital
sound system, you can adjust the audio.
To adjust the Dolby Digital audio:
1 If a DVD is playing, press STOP .
2 Press SETUP. The
Setup menu opens.
3 Press
or to select Playback, then press
ENTER. The
Playback menu opens.
4 Press or
to
select
Audio, then press
ENTER. The
Audio menu opens.
5 Press or
to
select
Digital Out, then
press ENTER. The
Audio - Digital Out screen
opens.
6 Press or
to
select
Dolby Digital, then
press ENTER. The
Digital Out - Dolby Digital
screen opens.
7 Press
or to select an option, then press
ENTER.
•
PCM—Select this option if your amplifier
or decoder is not compatible with Dolby
Digital. Dolby Digital audio is converted
into PCM (2-channel) audio.
•
Stream—Select this option if your
amplifier or decoder is compatible with
Dolby Digital audio.
8 Press SETUP to close the menu.
Using Dynamic Range Control
The Dynamic Range Control feature
compresses the range between the loudest and
softest sounds.
To use Dynamic Range Control:
1 If a DVD is playing, press STOP .
2 Press SETUP. The
Setup menu opens.
3 Press
or to select Playback, then press
ENTER. The
Playback menu opens.
4 Press or
to
select
Audio, then press
ENTER. The
Audio menu opens.
Audio
Dynamic Range Control
ON
Digital Out
Audio - Digital Out
m
a
e
r
t
S
l
a
t
i
g
i
D
y
b
l
o
D
z
H
k
8
4
M
C
P
Note
When playing a DVD-RW recorded in VR mode:
If the audio source on a DVD is Dolby Digital
format, set Dolby Digital to PCM so that you can
switch to main (L), sub audio (R), or a mix of both
(L/R) with your amplifier or decoder.
Digital Out - Dolby Digital
Stream
PCM
Audio
Dynamic Range Control
ON
Digital Out
08-1031_NS-FSDVDR.fm Page 25 Wednesday, March 12, 2008 2:53 PM