Hamilton Beach 840095300 - Manuel (Page 3)

5 4
9. Always use the highest speed possible on the blender
base.
10. Turn unit ON and process food. Turn OFF when complete.
11. Always wait until S-blade or disc has stopped rotating
before removing cover.
12. When using the S-blade, carefully remove the S-blade
before removing the processed food.
To Disassemble and Clean
1. Turn unit OFF and unplug cord from outlet.
2. To remove cover, turn counterclockwise.
3. Carefully remove the S-blade before removing processed
food. S-blade is very sharp, handle carefully.
4. To remove bowl, turn counterclockwise.
5. Bowl, cover, and food pusher may be washed in the top
rack of an automatic dishwasher.
6. For safety reasons, the S-blade should be carefully
washed by hand.
7. Never immerse gear assembly or blender base in water or
liquid, simply wipe clean with a damp cloth.
8. After washing re-assemble food processor attachment for
storage.
To Assemble and Operate
BEFORE FIRST USE: Wash the food pusher, cover, bowl,
and S-blade, and disc in hot soapy water. Blade is sharp;
handle carefully. Rinse and dry thoroughly. Do not immerse
gear assembly in water.
1. Place blender base on clean
dry surface. Make sure unit
is off and unplugged from
electrical outlet.
2. Place bowl onto gear assembly
and turn clockwise to lock.
(See Illustration A.)
3. Place gear assembly with bowl
attached onto blender base.
4. Fit S-blade over center shaft in
bowl. The blade is sharp; handle
carefully.
5. Place cover onto bowl and turn
clockwise to engage locking
mechanism. (See Illustration B.)
6. The S-blade will not operate until
the cover locking mechanism is
properly engaged.
7. Plug in blender base.
8. Always hold food processor firmly with one hand when
starting unit and during processing.
UN LO C K
LO CK
Illustration A
Illustration B
840095300 ENv00.qxd 12/12/01 2:43 PM Page 4