Hamilton Beach 67900 - Manuel (Page 4)

4
Important Information
• The juice extractor is manufactured
for NORMAL HOUSEHOLD USE. If
you have large quantities, such as
10 pounds or more, process in small
batches, allowing motor to cool
completely between uses.
• When juicing CARROTS, DO NOT
PACK food chute. Place carrots in
food chute one by one, and use
gentle pressure.
• DO NOT OVERLOAD THE FOOD
CHUTE. For best results, simply drop
food pieces, one at a time, into
chute. Gently and slowly press with
food pusher. This will extract the
maximum amount of juice.
• If the juice extractor SEEMS TO
STRUGGLE or slow down, turn the
unit OFF and unplug. Thoroughly
wash the cutter/strainer and separator
according to instructions. Reassemble
and continue juicing.
How to Assemble
Read and follow instructions in “Before First Use.”
1. Place separator on top of base as
shown on page 3.
2. Place cutter/strainer into separator
and gently push until firmly in place.
Once in place, the cutter/strainer
should spin easily.
3. Hook cover to base on one side.
Place cover on top
of separator and
cutter/strainer.
4. Position the top of safety latch in
place, then push in at bottom to lock.
DO NOT OPERATE UNIT UNTIL
SAFETY LATCH IS LOCKED.
5. Place pulp bin in place. Slide top in
first, then bottom, and snap into
place.
6. Place a juice cup in position,
under juice spout.
NOTE: Check the pulp bin frequently.
It is important to empty the pulp bin
when full and to clean out the separator.
1. For more information, see “Fruit &
Vegetable Preparation.”
2. Cut food into pieces to fit the food
chute.
3. Plug cord into 120 volt AC outlet.
4. Be sure juice container and pulp bin
are in place.
5. Turn switch to on. The unit will not
turn on until safety latch has been
closed.
6. Place food in food chute and press
lightly with food pusher. NEVER USE
FINGERS OR UTENSILS OTHER
THAN THE FOOD PUSHER AS A
FOOD PUSHER. Food should be
How to Use
placed in food chute only when unit
is operating. Food can be continu-
ously placed in food chute without
having to turn unit off.
7. When pulp bin is full, turn unit off. It
is very important to empty the pulp
bin when full. For best performance,
empty pulp bin and clean cutter/
strainer and separator often.
8. When juicing is completed, or when
pulp bin or juice container need to
be emptied, turn unit off and unplug
from outlet. Immediately wash cut-
ter/strainer according to instructions.
840118200 Ev01 10/15/03 4:55 PM Page 4