Power level, Booster and power management, Automatic preheating (or “heat-up” function) – Fulgor Milano 700 Series 36 Inch Induction Cooktop Use and Care Manuel d'utilisation

Page 15: Bridge function (for large pans), Special functions (low temp)

Advertising
background image

EN

11

Power level

The power level of the cooking area can be set from level 1

to level 9. A further level P (Power Booster) is available that

allows a very rapid heating of food and, therefore, saves you

time. The power level represented by an intermittent letter “A”

is the activation of the automatic heating function.

Booster and power management

The generator, with Booster enabled, provides an individual

cooking area power that is significantly higher than the rated

power; the display of the selected cooking area shows a “P”.

The Booster function can be activated by pressing at the end

of the cursor of the cooking area

(11)

. The power increase is

different depending on the size of the cooking area:
1. For a cooking area with a diameter of 5 3/4” (145 mm),

the power goes from a level 9 of 1400 W to the Booster

level of 2200 W for 10 minutes.

2. For a cooking area with a diameter of 7” (180 mm), the

power goes from a level 9 of 1850 W to the Booster level

of 3000 W for 10 minutes.

3. For a rectangular cooking area 7 1/2” x 8 1/2” (190 mm

x 220 mm), the power goes from a level 9 of 2000 W to

the Booster level of 3600 W for 10 minutes.

4. For a cooking area with a diameter of 11” (280 mm), the

power goes from a level 9 of 2300 W to the Booster level

of 3600 W for 10 minutes.

For safety reasons, the Booster function has a limited duration

(10 min), after 10 min the zone is reduced to level 9.

If the cooking vessel is removed from the cooking area during

the Booster time, the Booster remains active and the Booster

time is not deactivated. With the Booster activated, changing

the value set with your finger in the cursor area deactivates

the Booster. The Booster function “P” can be activated in all

cooking areas, but priority is given to the last Booster activated,

reducing any other cooking levels.

36” Power sharing table

LEFT

CENTRAL

RIGHT

9

P

6

P

P

P

8

P

6

30” Power sharing table

CENT/RIGHT

RIGHT

P

6

P

8

7

P

9

P

Automatic preheating (or “heat-up” function)

This feature makes cooking easier by adding ‘boil and reduce’

functionality to the elements. The surface automatically heats

up at Full Power and then returns to the selected power level

after a certain time (see Table).

Activating automatic heating (or “heat-up” function)

Press and hold an area of the cursor for the cooking area that

is working for about 3 seconds until you hear a beep (such as

1/3 of the length of the cursor area). For example: Select level

3 and activate the automatic heating function by pressing your

finger for 3 seconds. The corresponding display shows the

letter “A” alternating with “3”. With these settings, the cooking

surface heats the cooking area at the maximum level “9” for 2

minutes and then continues cooking level at level “3”.

Power livel

Duration Automatic

Heating Function

(time in minutes)

Maximum time

elements will operate

at power setting (time

in minutes)

0

-

1

0m 40s

516

2

1m 12s

402

3

2m

318

4

2m 56s

258

5

4m 16s

210

6

7m 12s

138

7

2m

138

8

3m 12s

108

9

-

90

P

-

10

Bridge function (For large pans)

This function facilitates cooking with elongated pans, is only

available for the rectangular cooking areas and is activated

by simultaneously pressing the 2 cursors of the 2 cooking

areas involved. At this point, a “ ” icon will light up next

to the display of the levels and the cooking area can now

be controlled from only once cursor since the other will work

simultaneously at the same level. Once set to bridge mode,

the leftmost of the two sliders becomes the master controller

for both elements. To disable bridge mode, simply touch both

slider controls simultaneously at any point along the adjustment

bars.

Special functions (low temp)

This function is available in each cooking area and its activation

is indicated by one of the two dedicated icons (17 & 18). It is

possible to activate 2 “cooking” levels:
1. Melting with a temperature of approximately 45°C.
2. Simmering with a temperature of approximately 70°C.
These temperatures are approximate and are greatly

dependent on the pot and the quantity of food.

After turning on the desired heating zone by pressing the key

Advertising
Ce manuel est liée aux produits suivants: