Standard operation - fan mode – LG Multi F Series 18,000 BTU Multi F Single Compatible Inverter Heat Pump Low Static Ducted Ceiling Indoor Unit Owners Guide Manuel d'utilisation
Page 11

Operating Introductions
Owner's Manual
11
ENGLISH
TEMP
FAN
SPEED
OPER
MODE
After operating the product by pressing
the button, set up the fan operation by
pressing the button.
1
When the dry operation is selected, “Fn” will
be shown on the display window as shown
on the left side.
- The temperature setting can not be
adjusted during operation this mode.
2
Press the button to select airflow rate
[Lo
→
Med
→
Hi].
When running ventilation, compressor of
AHU doesn’t work.
3
OPER
MODE
FAN
SPEED
Standard Operation - Fan Mode
It blows the air as it is in the indoor, not the cold wind.
•
Ventilation drive does not release cool wind but general fan
•
Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
•
The menu item of wind powerfulness might not be partially selected according to the product.