Danby 20 Inch 1000W Countertop Microwave Owners Guide - Manuel (Page 9)

8
FIRST TIME USE
When the appliance is plugged in for the fi rst time,
the display will show “00:00”. Use the number pad
to enter the current time and then press the clock
button to confi rm
When setting the cook timer, the appliance will
return to standby mode if there is no input within 25
seconds.
During operation:
• Press the Start/+30SEC button to begin
operation.
• Press the Stop button to cancel the cooking
program.
• The appliance will beep fi ve times at the end of
a cooking program.
SETTING THE CLOCK
The clock can be only be set as a 12 hour clock.
To set the current time:
1. Press the Clock button.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the
current time.
KITCHEN TIMER
To set the timer function:
1. Press the Kitchen Timer button.
2. Use the number pad to enter the desired time to
run the timer. The maximum time is 99 minutes
and 99 seconds.
3. Press the Start/+30SEC button to begin timer
operation.
Note: Programs cannot be set while the timer is
running.
OPERATING INSTRUCTIONS
MICROWAVE COOKING
1. Press the Time Cook button. The display will
show “00:00”.
2. Use the number pad to enter the desired cooking
time. The maximum time is 99 minutes and 99
seconds.
3. Press the Power button to choose a power level.
The default power level is 100%. The display
will show “PL10”. Use the number pad to enter
the desired power level if 100% is not required.
Consult the chart at the bottom of the page for
information on power levels.
4. Press the Start/+30SEC button to begin
operation.
Note: If “PL0” is selected, the appliance fan will run
with no cooking function. This power level can be
used to remove odors from the oven.
Note: During cooking, if the chosen power level is
not suffi cient, press the power button. The current
power level will fl ash for three seconds. Use the
number pad to choose a new power level and
operation will continue in the new power level.
Two Stage Cooking
Some recipes require different stages of cooking
at different temperatures. To set a two stage cook
program:
1. Press the Time Cook button and use the number
pad to enter the desired cooking time for the fi rst
stage.
2. Press the Power button and use the number
pad to enter the desired power level for the fi rst
stage.
3. Press the Time Cook button and use the number
pad to enter the desired cooking time for the
second stage.
4. Press the Power button and use the number pad
to enter the desired power level for the second
stage.
5. Press the Start/+30sec button to begin
operation.
Number Pad 0 1 2 3 4 5 6 7 8 9
Cooking Power 0% 10% 20% 30% 40% 50% 60% 70% 80% 90%
Display PL0 PL1 PL2 PL3 PL4 PL5 PL6 PL7 PL8 PL9