Sending a fax from the control panel, Receiving faxes – Epson WorkForce 435 Manuel d'utilisation

Page 18

Advertising
background image

18

Sending a Fax From the Control Panel

Sending a Fax From the Control Panel

You can send a fax by manually entering a fax number, as described below.

Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial list, see the next section. To send a fax from your computer using the Epson
FAX Utility, see your online User’s Guide.

1. Place your original(s) for faxing (see page 6).

2. Press the K

Copy/Fax

button to select Fax mode.

3. Use the numeric keypad to manually enter the fax

number. You can enter up to 64 digits.

4. To change fax settings, press x

Menu

and select settings as necessary.

5. Press the x

B&W

or x

Color

button to send your fax.

Note: If the recipient’s fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.

If you are scanning with the ADF, your document is automatically scanned and
faxed.

If you placed your document on the scanner glass,
you see this screen after the first page is scanned:

If you need to fax additional pages, place your
original on the scanner glass or in the ADF. Then press

1

to continue. If you do

not need to fax another page, press

2

. Your document is faxed.

If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press

Redial/Pause

.

To cancel faxing, press y

Stop/Clear Settings

at any time.

Note: If you turn off the product, the following data stored in the product’s temporary
memory will be lost: received faxes that haven’t yet been printed, faxes scheduled to
be sent later, and faex being retransmitted automatically.

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the

Paper Size

setting

that matches the size of paper you’ve loaded. If the incoming fax pages are larger than the
paper size you loaded, the fax size is reduced to fit or printed on multiple pages, depending
on the

Auto Reduction

setting you select. See your online User’s Guide for instructions.

andes_p2_QG.book Page 18 Wednesday, May 25, 2011 3:39 PM

Advertising