Before use refrigerator operation, Warning, Clean before using – Dacor EF36RNBSS Manuel d'utilisation

Page 5: Turning the main power switch on/off, Remove the packaging

Advertising
background image

3

Clean Before Using

After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions in
the Care and Cleaning section.

Important information to know about glass shelves and
covers:

Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter into
many small, pebble-size pieces. This is normal. Glass shelves
and covers are heavy. Use special care when removing them to
avoid impact from dropping.

Turning the Main Power Switch On/Off

If you need to turn the power to your refrigerator on or off,
you must remove the top grille assembly to access the power
switch. Turn the power to the refrigerator off when cleaning your
refrigerator or changing light bulbs.

Remove the Packaging

Remove tape and glue residue from surfaces before turning on

„

the refrigerator. Rub a small amount of liquid dish soap over
the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable

„

fluids or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see Important Safety Instructions on page1.

Dispose of/recycle all packaging materials.

„

Before Use

Refrigerator Operation

Removing the Top Grille

Grasp both ends of the top grille.

1.

Push the top grille straight up, then pull straight out. Lay the

2.

grille on a soft surface.

Replacing the Top Grille

Insert the top grille hooks (located on the back of the top grille)

1.

into the slots on the side trim.

Pull the grille down slightly to lock into place.

2.

Turning Power On or Off

Remove the top grille.

1.

Press power switch to the on or off position.

2.

Replace the top grille.

3.

A. Top grille

B. Cabinet side trim

B

B

A

A. Power switch

A

IMPORTANT: Be sure the power
switch is set to the On position after
cleaning refrigerator or changing
light bulbs.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,
fire, or electrical shock.

WARNING

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as
gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

Advertising
Ce manuel est liée aux produits suivants: