Lectronic, Ontrol, Enter – Dacor IF36BNDF Manuel d'utilisation

Page 5

Advertising
background image

2

3

a

bSent

m

ode

The Absent Mode feature causes the freezer to

defrost less frequently, conserving energy. The

Absent Mode indicator light will illuminate when the feature is

activated. To deactivate, press the Absent Mode pad again OR

open either door. The indicator light will go out.

Notes:

• Door openings will not deactivate Absence Mode for approxi-

mately one hour after activation.

• If vacationing for more than a few days, see the Preparing for

Vacation/Absence section on page 14.

t

emp

a

larm

The Temp Alarm system will alert you if the

freezer or fresh food temperatures exceed normal

operating temperatures due to a power outage or other event.

When activated, the Temp Alarm light will illuminate.

If the freezer or fresh food temperatures have exceeded these

limits, the display will alternately show the current compartment

temperatures and the highest compartment temperatures reached

when the power was out. An audible alarm will sound repeatedly.

Press the Temp Alarm pad once to stop the audible alarm. The

Temp Alarm light will continue to flash and the temperatures will

alternate until the temperatures have stabilized.

To turn off Temp Alarm, press and hold the Temp Alarm pad for

three seconds. The indicator light will go off.

d

oor

a

larm

Press the Door Alarm pad to activate or deactivate

the door alarm. The Door Alarm is active when the

indicator above the Door Alarm pad is lit.

The Door Alarm alerts you when one of the doors has been left

open for five continuous minutes. An audible alarm will sound

every few seconds until the door is closed, or the Door Alarm is

deactivated .

m

ax

c

ool

When activated, Max Cool causes the fresh food

and freezer temperatures to drop to the minimum

settings on the control. This cools down the refrigerator and

freezer after extended door openings or when loading the refrig-

erator or freezer with warm food.

Note:

When the Max Cool feature is in operation, the and pads

for the refrigerator and freezer controls will not operate.

To activate, press the Max Cool pad. Max Cool will deactivate

automatically after 12 hours, OR press the Max Cool pad to

deactivate the feature.

e

lectronIc

c

ontrol

c

enter

u

Ser

p

referenceS

Access the User Preferences menu to:

• Change the temperature display from °F to °C

• Enable or disable audible alarms.

• Activate the Sabbath mode

To access the user preferences menu, press and hold the Door

Alarm pad for three seconds. When in the user preferences mode,

a short title for the feature will appear in the freezer temperature

display and the feature status will appear in the fresh food display.

1. Use the freezer up and down control to scroll through

the preferences.

2. When the desired preference is displayed, use the fresh food

up and down control to change the status.

3. When changes are complete, press and hold the Door Alarm

pad for three seconds or close the fresh food door(s).

a

bout

the

t

emperature

d

ISplay

(f_c)

“F” indicates that the temperature is displayed in degrees

Fahrenheit. “C” indicates that the temperature is displayed in

degrees Celsius.

a

bout

S

abbath

m

ode

(Sab)

When the Sabbath Mode is ON, all control lights and the night

light are disabled until the Sabbath feature is turned OFF. This

feature does not disable the interior lights. Press any pad on the

control center to restore the control lights and turn Sabbath mode

to OFF.

a

larm

(al)

When Alarm mode is OFF, all audible alarms will be disabled until

the feature is turned ON.

t

o

t

urn

y

ou

r

efrIgerator

o

ff

/o

n

Press the freezer Up Arrow control repeatedly until “OFF”

appears in the freezer display. Allow a few seconds for the

refrigerator to shut off. Neither compartment will cool.

Press either the refrigerator or freezer Up Arrow or Down

Arrow control to turn on the refrigerator.

W

arm

c

abInet

S

urfaceS

At times, the front of the refrigerator cabinet may be warm to the

touch. This is a normal occurrence that helps prevent moisture

from condensing on the cabinet. This condition will be more

noticeable when the refrigerator is first started, during hot weather

and after excessive or lengthy door openings.

Advertising