Answer machine (only neobio 15r/25r), Switching the answer machine on/off, Outgoing message – Doro NEOBIO 20 Manuel d'utilisation
Page 9: Screening
English
Answer machine (only NeoBio 15r/25r)
When the answer machine is switched on calls are answered after a set number of rings, your outgoing
message is heard and the caller can leave a message. �otal memory capacity is up to 15 minutes depending on
the set sound quality (NeoBio 15r), or 30 min (NeoBio 25r). Most functions can be accessed from both base
unit and handset.
Switching the answer machine on/off
Press
1
(on the base unit) to switch the answer machine off/on. If the base unit’s display is flashing/
showing
--
the answer machine is disconnected, or time/date is not set.
Off/On from the handset
1.
Press . Scroll to
ANS. MACHINE
. Press
OK
.
2.
Scroll to
TAM OFF/ON
. Press
OK
.
3.
Scroll to desired setting. Press
OK
.
If the handset’s display shows
with a steady light the answer machine is switched on. If there are new
messages, the indicator will flash whether the answer machine is off or on.
Even when answer machine is OFF it will still answer after 10 rings, please see
Remote activation
.
Outgoing message
�he outgoing message (max 3 min) is heard by incoming calls. �here are two separate outgoing messages,
one for Answer only (callers cannot leave a message) and one for normal answering function. Please also
select desired answer function. See
TAM Settings
.
1.
Press . Scroll to
ANS. MACHINE
. Press
OK
.
2.
Scroll to
TAM SETTINGS
. Press
OK
.
3.
Scroll to
OGM SETTINGS
. Press
OK
.
4.
Scroll to
ANSWER & REC
/
ANSWER ONLY
. Press
OK
.
5.
Scroll to
RECORD MESS.
Press
OK
.
6.
After the long beep you can record your message (speaking 20 cm from the keypad). Press
OK
.
7.
�he message will be played back to you. Repeat the above to change.
A pre-recorded message is used until you make your own recording, and that message can also be restored if
required.. To restore this, press
C
(right menu button) during playback of outgoing message.
Screening
Incoming messages will be heard on the loudspeaker of the base unit as they are received. If nothing can be
heard, check that the volume is turned up and that the function has been activated – see separate description
Answer machine settings
. You can also press
OK
on the handset while recording is in progress. �he call can
be intercepted by pressing
q
or lifting the receiver of another telephone connected to the same line.