Danby SBWC040A1S - Manuel (Page 11)

be blown or the circuit
Plug not fully inserted into Make sure the 3-prong plug is fully
too High adjust if neccessary
Door not shut properly Ensure that the door is fully closed
the cabinets. Open the doors only as
needed and for short periods of time
Interior lights toggled on The interior lights are intended for
intended to be left on for prolonged
Condensation on the High humidity conditions The condensation will subside once
Door not shut properly Ensure that the door is fully closed
the cabinets. Open the door only as
needed and for short periods of time
DW
EUHDNHU
few seconds and then plug it back in
or opened excessively and that the gasket is sealing against
temporary lighting of cabinets and for
load introduction if possible
cabinet and/or doors in the home humidity conditions return to normal.
or opened excessively and that the gasket is sealing against
A large quantity of warm
bottles was recently added
/LPLWWKHTXDQWLW\RIZDUPERWWOHV
EHLQJLQWRGXFHGWRWKHFDELQHWDWWKH
periods of time.
If none of the above rectify the situation, contact our customer care department
TROUBLESHOOTING
No Power A fuse in your home may Replace the fuse or reset circuit
Problem Possible Cause What to do
breaker tripped.
Power surge. Unplug the Wine Cooler, wait a
wall outlet inserted into outlet. .
.
.
.
.
.
.
.
.
.
.
Cabinet Temperature Temperature setting Verify the temperature control setting,
.
.
to the cabinet same time. Attempt to stagger the
display purposes only. They are not
10
BEFOR YOU CALL FOR SERVICE